This robust brass stock sheet, engineered for demanding pulling and lifting applications, offers superior strength and excellent corrosion resistance. Its substantial thickness ensures reliability under heavy load conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.971" |
| Length | 45" |
| Width | 40" |
Trusted by engineers across multiple sectors, this brass stock sheet is manufactured to stringent tolerances, ensuring consistent performance in critical pulling and lifting operations. With a significant thickness of 0.971 inches, a length of 45 inches, and a width of 40 inches, this material provides exceptional structural integrity. The inherent properties of brass, including its high tensile strength, ductility, and resistance to galvanic corrosion, make it an ideal choice for environments where durability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended load capacity and ensure the brass sheet is appropriately sized and rated for the application. 2. Securely fasten the brass sheet to the structural framework using high-tensile, corrosion-resistant fasteners. 3. Perform rigorous testing to verify the integrity of the installation and the load-bearing capabilities.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Underestimating required thickness for the load. | Consult engineering load charts and perform stress calculations to determine the minimum required thickness for the specific application. |
| Using standard fasteners in corrosive environments. | Utilize stainless steel or other high-grade corrosion-resistant fasteners to prevent premature failure and ensure long-term structural integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch plates, Custom rigging components, Reinforced lifting points.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||