Engineered for extreme environments, this substantial brass stock sheet offers exceptional durability and corrosion resistance. Ideal for custom hydraulic manifold fabrication and high-pressure component construction.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.970" |
| Length | 44" |
| Width | 45" |
Purpose-built for heavy-duty applications, this 0.970-inch thick brass stock sheet measures 44 inches in length and 45 inches in width. Manufactured from high-grade brass, it exhibits excellent machinability, superior corrosion resistance against various hydraulic fluids, and robust structural integrity. Its substantial thickness ensures it can withstand significant hydraulic pressures and mechanical stresses, making it an ideal material for fabricating custom manifold blocks, valve bodies, accumulator shells, and other critical components within demanding industrial hydraulic systems. The material's inherent properties contribute to long service life and reliable performance in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity of the brass stock sheet. 2. Precisely machine the sheet according to design specifications for hydraulic components. 3. Thoroughly clean all machined surfaces to remove debris and contaminants before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for hydraulic pressures. | Always specify and verify the use of high-strength, corrosion-resistant brass alloys suitable for the intended hydraulic system's pressure and fluid compatibility. |
| Inadequate surface preparation leading to sealing failures. | Ensure all mating surfaces are meticulously cleaned, deburred, and free from any foreign matter or machining marks that could compromise seal integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Hydraulic Manifold Fabrication, High-Pressure Valve Body Construction, Hydraulic Accumulator Shells, Specialty Hydraulic Component Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||