This robust Nylon stock sheet is engineered for critical pressure and temperature control systems. Its substantial thickness and durable nylon composition ensure reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.968" |
| Length | 35" |
| Width | 45" |
Precision-manufactured to tight tolerances, this 0.968" thick Nylon stock sheet measures 35" in width and 45" in length. Composed of high-grade nylon, it exhibits excellent tensile strength, wear resistance, and a broad operating temperature range, making it ideal for gaskets, seals, and structural components in high-pressure and temperature-regulated equipment. Its inherent chemical resistance further enhances its suitability for diverse industrial fluid handling and control applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten or integrate the cut nylon component into the assembly, ensuring proper sealing or structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, fine-toothed blades or specialized plastic-cutting tools to achieve clean, precise cuts without damaging the material. |
| Over-tightening fasteners, which can stress or crack the nylon material. | Apply torque gradually and use washers to distribute pressure evenly. Consult material datasheets for recommended torque values if available. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure sealing components, Temperature regulation system insulation, Wear-resistant structural supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||