This premium Nylon stock sheet offers exceptional durability and resistance for demanding HVAC applications. Its robust material properties and precise dimensions ensure reliable performance in critical heating and cooling systems.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.967" |
| Length | 27" |
| Width | 15" |
Manufactured under strict quality controls, this 0.967-inch thick Nylon stock sheet boasts a substantial 27-inch length and 15-inch width. Engineered from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a high service temperature range, making it suitable for environments exposed to moderate heat and common industrial fluids. Its dimensional stability and low coefficient of friction contribute to efficient operation and extended component lifespan in filtration and structural support roles within HVAC systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 2. Ensure the mounting surface is clean and free of debris for optimal adhesion or fastening. 3. Securely fasten or bond the cut component according to the system's design specifications, verifying alignment and integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools, leading to delamination or rough edges. | Utilize carbide-tipped blades or specialized plastic cutting tools designed for clean, precise cuts on Nylon. |
| Over-tightening fasteners, potentially causing stress fractures in the Nylon. | Employ torque-limiting tools and use washers to distribute load evenly when fastening Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Air filter frame construction, Duct insulation support, Component mounting plates in HVAC units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||