This robust carbon steel stock sheet, engineered to exacting standards, provides exceptional durability for critical pressure and temperature control systems. Its substantial thickness ensures resilience in demanding operational conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.967" |
| Length | 29" |
| Width | 30" |
Designed for demanding industrial environments, this 0.967-inch thick carbon steel stock sheet offers superior mechanical strength and heat resistance. Precisely cut to 29 inches in length and 30 inches in width, it is manufactured from high-grade carbon steel, ensuring excellent weldability and formability for fabrication in high-pressure vessel components, heat exchangers, and high-temperature ducting. Its composition minimizes susceptibility to thermal expansion stress and deformation under extreme thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare surfaces for welding or fastening, ensuring they are free from contaminants. 2. Accurately position the sheet according to fabrication drawings. 3. Execute welding or joining procedures according to industry best practices for carbon steel, considering preheating and post-weld heat treatment if required by application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor weld adhesion. | Thoroughly clean all mating surfaces with a degreaser and wire brush to remove any rust, scale, or oil before joining. |
| Ignoring material stress relief during fabrication in high-cycle applications. | Implement appropriate post-weld heat treatment (PWHT) as specified by design codes and material standards to mitigate residual stresses. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: High-pressure vessel fabrication, Heat exchanger construction, Industrial furnace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||