This 0.959-inch thick Nylon stock sheet, measuring 47 by 20 inches, is engineered for robust hydraulic applications. Its superior material properties ensure exceptional performance and longevity in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.959" |
| Length | 47" |
| Width | 20" |
Manufactured under strict quality controls, this 0.959" thick Nylon stock sheet offers superior mechanical strength, excellent impact resistance, and low friction properties crucial for hydraulic components. The 47" length and 20" width provide ample material for custom fabrication of seals, wear pads, and other high-pressure fluid system parts. Nylon's inherent chemical resistance and self-lubricating characteristics make it ideal for seals, bearings, and guides in hydraulic cylinders, pumps, and valves, ensuring reliable operation and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions for the specific hydraulic component. 2. Machine the component to its final design tolerances, ensuring smooth surfaces and proper fit. 3. Integrate the fabricated Nylon part into the hydraulic system, verifying proper seating and function under operational pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly shaped components, leading to seal failure or leakage. | Ensure accurate measurement and machining of the Nylon stock sheet to match the exact specifications of the hydraulic system component. |
| Over-tightening fasteners or applying excessive force during assembly, potentially causing stress fractures in the Nylon. | Follow recommended torque specifications and assembly procedures, avoiding localized stress points on the Nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Rings and Guides, Pump Components, Valve Seats, Bearing Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||