Engineered for high-performance pressure and temperature control, this robust 0.957-inch thick Nylon stock sheet offers superior durability and thermal resistance. Its dimensional stability and excellent mechanical properties make it ideal for critical industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.957" |
| Length | 30" |
| Width | 24" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a substantial 0.957" thickness, providing exceptional structural integrity and resistance to deformation under pressure. Its inherent toughness, excellent abrasion resistance, and broad operating temperature range (-40°F to 250°F) make it a reliable choice for components in fluid handling systems, thermal insulation barriers, and wear pads. The 30" x 24" dimensions offer ample material for custom fabrication of seals, gaskets, and protective liners subjected to continuous operation and varying thermal loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the cut component using mechanical fasteners or approved adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense polymers. | Utilize carbide-tipped saw blades or specialized routing bits for clean, precise cuts without delamination or excessive heat buildup. |
| Over-tightening fasteners, leading to material stress or cracking. | Employ torque-limiting tools or washers to distribute load evenly and prevent localized stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure seals and gaskets, Thermal insulation components, Wear-resistant liners and guides, Custom fabricated valve seats, Electrical insulating barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||