This robust brass stock sheet, measuring 0.957 inches thick, 24 inches in length, and 30 inches in width, is specifically designed for demanding pulling and lifting operations where strength and corrosion resistance are paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.957" |
| Length | 24" |
| Width | 30" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.957" thickness, ensuring exceptional load-bearing capacity for pulling and lifting applications. Its dimensions of 24" in length and 30" in width provide ample surface area for structural integrity. Composed of high-grade brass, it exhibits superior tensile strength, resistance to environmental degradation, and non-sparking properties, making it suitable for hazardous environments. This material's inherent durability minimizes wear and deformation under extreme stress, guaranteeing consistent operational effectiveness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and mark the required cutouts for attachment points. 3. Securely fasten the brass stock sheet using appropriate industrial-grade fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that cannot adequately support the load. | Select fasteners with a shear and tensile strength rating that exceeds the anticipated maximum load of the pulling or lifting mechanism. |
| Mounting the sheet on an uneven or improperly reinforced surface. | Verify the mounting surface is structurally sound and level to prevent uneven stress distribution and potential material fatigue. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Crane support plates, Towing apparatus structural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||