This premium nylon stock sheet, precisely manufactured to 0.956" thickness, 15" width, and 33" length, offers exceptional strength and durability for demanding pressure and temperature control applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.956" |
| Length | 15" |
| Width | 33" |
Manufactured under strict quality controls, this 0.956" thick nylon stock sheet (15" x 33") exhibits excellent mechanical strength, abrasion resistance, and a wide operating temperature range. Its inherent toughness and low coefficient of friction make it ideal for fabricating custom seals, gaskets, bearings, and wear components within pressure and temperature regulation systems. The material's resilience ensures long service life in challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or form the cut material into the desired component profile. 3. Install the fabricated component according to system specifications, ensuring proper seating and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics like nylon, leading to melting or poor edge quality. | Employ sharp, high-speed cutting tools specifically designed for machining nylon, such as carbide-tipped blades or routers, to ensure clean cuts and avoid material degradation. |
| Overheating the nylon during machining operations, which can cause softening, deformation, and compromised mechanical properties. | Utilize adequate cooling methods during machining, such as flood coolant or compressed air, and maintain appropriate feed rates and spindle speeds to manage heat generation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gaskets for High-Pressure Valves, Wear Plates in Temperature Regulators, Sealing Components in Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||