This high-density Nylon stock sheet provides exceptional strength and thermal stability for demanding pressure and temperature control systems. Its robust composition ensures long-term reliability in industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.948" |
| Length | 39" |
| Width | 32" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.948-inch thickness, offering superior load-bearing capacity and insulation properties. Measuring 39 inches in length and 32 inches in width, it's precision-cut from industrial-grade Nylon, known for its excellent wear resistance, low friction, and compatibility with a wide range of chemicals and lubricants. This makes it an ideal material for fabricating components in pressure vessels, thermal barriers, pump components, and sealing elements where precise dimensional stability under thermal and mechanical stress is critical. Its inherent toughness mitigates the risk of material fatigue and failure in high-cycle applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Prepare mating surfaces for secure and airtight or watertight seals if applicable. 3. Install the fabricated Nylon component, ensuring proper alignment and load distribution as per system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics, leading to poor edge finish and potential material degradation. | Utilize carbide-tipped saw blades or CNC routing equipment specifically designed for machining Nylon to achieve clean, precise cuts without melting or chipping. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon material. | Employ appropriate torque specifications and consider using washers or backing plates to distribute load evenly when fastening Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel liners and seals, Thermal insulation barriers, Wear plates and guide components, Pump and valve components, Custom gasket fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||