This 0.937-inch thick polycarbonate stock sheet offers exceptional strength and impact resistance, making it a reliable solution for rigorous pulling and lifting applications where material integrity is paramount.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.937" |
| Length | 12" |
| Width | 23" |
A proven choice for industrial professionals, this 0.937" thick polycarbonate stock sheet, measuring 12" in width and 23" in length, delivers superior performance in demanding environments. Its inherent high impact strength, exceeding that of glass and acrylic, ensures durability under extreme stress, while its excellent tensile strength and rigidity make it suitable for load-bearing components. The material's resistance to chemicals and abrasion further enhances its longevity in industrial settings, guaranteeing reliable operation for your pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before installation. 2. Secure the sheet using appropriate industrial-grade fasteners designed for polycarbonate. 3. Verify that all mounting points distribute load evenly to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too small or sharp, leading to cracking. | Utilize oversized, rounded washers with fasteners appropriate for polycarbonate thickness to distribute stress effectively. |
| Over-tightening fasteners, causing localized stress and potential fracture. | Tighten fasteners only until snug, allowing for slight expansion and contraction of the material. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards for heavy-duty lifting equipment, Protective shields for material handling systems, Impact-resistant components in winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||