This robust 0.936-inch thick Nylon stock sheet, measuring 24"x17", offers exceptional strength and thermal resistance. Engineered for demanding environments, it ensures superior performance in pressure and temperature control systems.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.936" |
| Length | 24" |
| Width | 17" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.936" thickness, providing excellent structural integrity and load-bearing capacity. The 24" length and 17" width offer ample material for fabrication in critical pressure and temperature control applications. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and a broad operating temperature range, make it a prime choice for seals, gaskets, and structural components within complex industrial systems. Its resistance to various chemicals and environmental factors further ensures longevity and operational consistency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Install the fabricated component, ensuring proper alignment and secure fastening to maintain system integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to rough edges or material damage. | Utilize sharp, carbide-tipped saw blades or laser cutting equipment designed for plastics to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress concentrations and eventual cracking of the Nylon. | Employ torque-limiting tools and follow recommended tightening procedures for Nylon components to prevent excessive stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure valve seals, Temperature control system insulation, Custom gasket fabrication, Bearing and wear components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||