This high-strength carbon steel stock sheet is engineered for demanding hydraulic system fabrication. Its substantial thickness and dimensions provide the foundational integrity required for high-pressure and heavy-duty operational environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.931" |
| Length | 15" |
| Width | 42" |
Purpose-built for heavy-duty applications, this 0.931" thick carbon steel stock sheet offers exceptional tensile strength and rigidity, crucial for withstanding the pressures inherent in hydraulic systems. Measuring 15 inches by 42 inches, its generous dimensions allow for efficient fabrication of robust components such as manifolds, structural supports, and protective housings. The material's inherent toughness makes it resistant to deformation under load, ensuring long-term reliability and performance in industrial, mobile, and agricultural hydraulic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity before cutting. 2. Employ appropriate cutting tools and techniques for 0.931" carbon steel. 3. Prepare edges for welding or assembly according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for hydraulic components. | Always utilize specified carbon steel grades to ensure adequate pressure and load bearing capacity. |
| Improper edge preparation leading to weld defects. | Ensure clean, beveled edges are prepared according to welding standards for strong, leak-free joints. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Heavy Equipment Frame Reinforcement, Industrial Hydraulic Power Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||