This robust carbon steel stock sheet, precisely cut to 27" x 18" with a 0.926" thickness, is engineered for demanding hydraulic applications requiring superior strength and durability.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.926" |
| Length | 27" |
| Width | 18" |
Manufactured under strict quality controls, this 0.926-inch thick carbon steel stock sheet meets stringent industry standards for hydraulic component fabrication. Its high tensile strength and shear resistance make it ideal for constructing robust hydraulic manifolds, accumulator bodies, and high-pressure system housings. The material's excellent machinability allows for precise drilling, milling, and threading, ensuring leak-free seals and reliable performance in extreme operational conditions. Dimensional tolerances are maintained to ±0.005 inches for consistent fit and function in complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Prepare edges and surfaces for machining according to design requirements. 3. Machine to precise tolerances for critical interface areas, ensuring proper sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for high-pressure hydraulic components. | Always utilize specified thickness and grade carbon steel to withstand operational pressures and prevent catastrophic failure. |
| Inadequate edge preparation leading to stress concentrations or poor sealing. | Ensure all machined edges are deburred and chamfered according to design to prevent premature wear and ensure proper gasket seating. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Accumulator Housings, High-Pressure Fluid Power Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||