This premium carbon steel stock sheet is engineered for the rigorous demands of hydraulic system construction. Its substantial 0.922" thickness ensures superior structural integrity and durability for critical components.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.922" |
| Length | 32" |
| Width | 28" |
Manufactured under strict quality controls, this 0.922" thick carbon steel stock sheet boasts a nominal yield strength and tensile strength suitable for high-pressure hydraulic applications. The precise dimensions of 32" in length and 28" in width facilitate efficient fabrication of hydraulic manifolds, pump housings, and valve bodies. Its carbon content ensures excellent weldability and machinability, making it ideal for custom hydraulic component production requiring high reliability and resistance to mechanical stress and fatigue.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish meet project specifications. 2. Prepare edges for welding or machining according to design requirements. 3. Fabricate components using appropriate welding procedures or machining techniques for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge steel for high-pressure hydraulic components. | Always select steel stock with adequate thickness to withstand system operating pressures and potential shock loads, as specified by hydraulic design standards. |
| Inadequate surface preparation before fabrication. | Ensure the steel surface is clean, free from mill scale, rust, or contaminants, to ensure proper weld penetration and material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifolds, Pump Housings, Valve Bodies, Cylinder End Caps, Accumulator Shells.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||