This robust 0.918-inch thick Nylon stock sheet is engineered for superior performance in pressure and temperature control systems. Its exceptional strength and resilience make it a critical component for demanding industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.918" |
| Length | 30" |
| Width | 29" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a substantial 0.918" thickness, providing exceptional structural integrity. Measuring 30" in length and 29" in width, it offers ample material for fabrication. Nylon's inherent properties of high tensile strength, excellent wear resistance, and good chemical inertness make it ideal for sealing, gasketing, and wear pads in systems subjected to moderate pressure and temperature fluctuations. Its low coefficient of friction also aids in reducing wear and improving operational efficiency. This material is well-suited for applications involving fluid handling, mechanical components, and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut component using suitable mechanical fasteners or adhesives, ensuring a tight and leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics. | Employ carbide-tipped saw blades or industrial routers specifically designed for cutting Nylon to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to material deformation or cracking. | Use washers and torque fasteners to manufacturer specifications for Nylon, avoiding excessive pressure that could compromise the material's integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel gasketing, Temperature regulation components, Wear strips and guides in control mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||