This robust Nylon stock sheet provides exceptional durability and resilience for critical pressure and temperature control applications. Its superior material properties ensure reliable performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.914" |
| Length | 25" |
| Width | 41" |
A proven choice for industrial professionals, this 0.914" thick Nylon stock sheet, measuring 25" in length and 41" in width, offers excellent tensile strength, wear resistance, and a wide operating temperature range suitable for pressure and temperature control systems. Its inherent toughness and low coefficient of friction make it ideal for components subjected to continuous stress and thermal cycling, ensuring long service life and consistent operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free from debris. 2. Carefully cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using compatible hardware, ensuring proper tension and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense polymers. | Employ sharp, carbide-tipped blades designed for cutting plastics to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to stress concentration. | Use washers and torque fasteners to the recommended specifications for Nylon to avoid material deformation and potential cracking. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel liners, Thermal insulation barriers, Sealing components in high-temperature systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||