This high-strength carbon steel stock sheet, precisely manufactured to 0.912" thickness, 19" width, and 32" length, is engineered for the rigorous demands of hydraulic system construction and repair.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.912" |
| Length | 19" |
| Width | 32" |
Engineered for reliability and performance, this carbon steel stock sheet provides exceptional structural integrity essential for hydraulic manifold blocks, pump housings, and high-pressure fluid containment. With a robust thickness of 0.912 inches, a length of 19 inches, and a width of 32 inches, it offers ample material for machining complex geometries and withstanding significant operational forces. The inherent strength and weldability of carbon steel make it a cost-effective and dependable choice for applications requiring robust mechanical properties and resistance to wear and abrasion within hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against project specifications. 2. Machine to precise tolerances for mating components within the hydraulic system. 3. Ensure proper welding or fastening techniques are applied according to hydraulic design standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for hydraulic components. | Always adhere to the engineering drawings and select stock material that meets or exceeds the specified thickness to ensure adequate pressure containment and structural longevity. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean the stock sheet to remove any contaminants, mill scale, or rust to prevent inclusions and ensure proper fusion during welding and accurate machining. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, High-Pressure Hydraulic Cylinder Components, Pump and Valve Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||