This high-strength carbon steel stock sheet, specifically engineered for hydraulic systems, offers exceptional durability and performance. Its precise dimensions ensure seamless integration into demanding fluid power applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.911" |
| Length | 13" |
| Width | 47" |
Specified by design engineers worldwide, this 0.911-inch thick carbon steel stock sheet measures 13 inches in length and 47 inches in width, meeting stringent industry standards for hydraulic component manufacturing. Its robust carbon steel composition provides superior tensile strength and rigidity, crucial for withstanding high pressures and operational stresses inherent in hydraulic circuits. Ideal for fabricating robust hydraulic manifolds, cylinder components, and structural supports requiring exceptional load-bearing capacity and resistance to wear and deformation. The material's weldability and machinability facilitate complex fabrication processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare surfaces for fabrication, ensuring flatness and absence of defects. 3. Execute cutting, shaping, and joining operations according to approved engineering drawings and welding procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for high-pressure hydraulic components. | Always adhere to specified material grades and minimum thickness requirements for critical hydraulic applications to ensure system integrity and safety. |
| Improper edge preparation for welding, leading to weak or brittle joints. | Ensure proper beveling and cleaning of weld edges according to industry best practices for carbon steel to achieve strong, reliable welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Heavy Equipment Cylinder Construction, Industrial Power Unit Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||