This robust brass stock sheet is engineered for critical hydraulic system components. Its substantial thickness and brass composition ensure exceptional strength, corrosion resistance, and reliability in high-pressure environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.908" |
| Length | 32" |
| Width | 28" |
Purpose-built for heavy-duty applications, this 0.908-inch thick brass stock sheet offers superior strength and corrosion resistance essential for hydraulic manifold blocks, pressure vessels, and critical fluid power components. Its precise dimensions of 32 inches in length and 28 inches in width facilitate efficient machining and fabrication of complex hydraulic assemblies. The inherent properties of brass, including its excellent machinability and resistance to hydraulic fluids and environmental degradation, make this material ideal for applications demanding longevity and unwavering performance under extreme operational conditions, including high-pressure and corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free from debris before fabrication. 2. Precisely machine the brass stock sheet according to hydraulic system design specifications, maintaining tight tolerances. 3. Carefully inspect all machined components for burrs or imperfections that could impede fluid flow or compromise seal integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for hydraulic pressure. | Always specify and verify that the brass alloy meets the pressure and corrosion resistance requirements of the specific hydraulic application. |
| Insufficient surface preparation before machining. | Thoroughly clean and degrease the brass stock sheet to prevent contamination during the machining process, which can lead to surface defects. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, High-Pressure Fittings and Connectors, Hydraulic Valve Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||