This robust 0.904" thick Nylon stock sheet is engineered for extreme hydraulic environments. Its superior material properties ensure longevity and reliable performance in demanding industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.904" |
| Length | 44" |
| Width | 39" |
Trusted by engineers across multiple sectors, this 0.904" thick Nylon stock sheet offers exceptional mechanical strength, excellent wear resistance, and good impact absorption, making it ideal for hydraulic components. Measuring 44" in length and 39" in width, it provides ample material for fabrication. The inherent lubricity of nylon minimizes friction, crucial for dynamic hydraulic systems, while its chemical resistance safeguards against common hydraulic fluids. This material is a proven performer in seals, bearings, and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and machining processes are performed with appropriate tooling designed for nylon to prevent overheating. 2. Clean all mating surfaces thoroughly to remove any debris or contaminants before assembly. 3. Install the fabricated nylon component according to the specific system design specifications and torque requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining nylon at excessive speeds, causing melting or degradation of the material. | Utilize sharp cutting tools with appropriate speeds and feed rates, along with coolant if necessary, to maintain material integrity. |
| Over-tightening fasteners or components, leading to stress cracking in the nylon. | Adhere to specified torque values and use appropriate washers or spacers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Rings and Bushings, Pump Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||