This robust Nylon stock sheet, precisely manufactured to 0.902" thickness, offers exceptional durability and wear resistance, making it ideal for demanding hydraulic systems requiring reliable component fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.902" |
| Length | 37" |
| Width | 14" |
Engineered for reliability and performance, this Nylon stock sheet is manufactured from high-grade nylon, offering superior tensile strength, excellent abrasion resistance, and good chemical inertness crucial for hydraulic fluid compatibility. Its precise dimensions of 0.902" thickness, 37" length, and 14" width ensure consistent material for machining critical hydraulic components such as seals, bushings, wear pads, and custom fittings where dimensional stability under pressure and load is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Fabricate component to exact specifications using appropriate machining techniques for Nylon. 2. Thoroughly clean the fabricated component to remove any machining debris. 3. Install the component within the hydraulic system, ensuring proper sealing and alignment as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining Nylon too quickly, leading to melting and poor surface finish. | Utilize slower cutting speeds and adequate coolant to manage heat during machining. |
| Not accounting for Nylon's moisture absorption in critical dimension calculations. | Allow for material conditioning in a controlled environment before final machining of dimensions sensitive to moisture. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Strips and Bushings, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||