This 0.897-inch thick polycarbonate stock sheet is engineered for demanding hydraulic applications. Offering exceptional impact strength and clarity, it reliably contains high-pressure fluids and protects sensitive components.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.897" |
| Length | 47" |
| Width | 33" |
Built to exacting engineering tolerances, this 0.897-inch thick polycarbonate sheet (47" x 33") provides superior performance in hydraulic systems. Its high impact resistance, exceeding that of glass and acrylic, ensures integrity under pressure. The material exhibits excellent clarity for visual monitoring of fluid levels and conditions, and offers good resistance to a range of hydraulic fluids and common industrial chemicals. This makes it ideal for sight glasses, fluid reservoirs, and protective covers in demanding environments where durability and visibility are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Apply appropriate sealant or gasket material per hydraulic system specifications. 3. Carefully position and secure the polycarbonate sheet, avoiding excessive localized pressure that could induce stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners directly onto the polycarbonate surface. | Utilize rubber grommets or appropriate standoff hardware to distribute load and prevent point loading. |
| Using cleaning agents not approved for polycarbonate, leading to surface degradation. | Consult the material data sheet for recommended cleaning solutions and procedures. Mild soap and water is often sufficient. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system sight glasses, Fluid reservoir windows, Protective guards for hydraulic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||