This robust 0.883-inch thick carbon steel stock sheet, measuring 37 inches by 42 inches, is engineered for demanding pulling and lifting operations requiring exceptional strength and structural integrity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.883" |
| Length | 37" |
| Width | 42" |
Manufactured under strict quality controls, this 0.883" thick carbon steel stock sheet exhibits a nominal yield strength of 36,000 psi and a tensile strength of 58,000 psi, ensuring superior load-bearing capabilities. Its dimensions of 37" x 42" provide ample surface area for fabrication into various lifting beams, spreader bars, or structural components. The inherent hardness and toughness of carbon steel make it resistant to deformation under heavy stress, crucial for safety-critical pulling and lifting applications in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended application and design requirements. 2. Cut the stock sheet to the precise dimensions needed for fabrication. 3. Fabricate the component using appropriate welding, drilling, and finishing techniques, adhering to industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for critical load-bearing components. | Always select steel with a minimum yield and tensile strength that significantly exceeds the maximum anticipated load, referencing relevant engineering standards. |
| Inadequate edge preparation or weld procedures leading to premature failure. | Ensure all edges are properly chamfered and all welds meet or exceed applicable welding codes and specifications for structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting beams, Construction of heavy-duty spreader bars, Reinforcement plates for industrial rigging equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||