This robust 0.882-inch thick carbon steel stock sheet, measuring 28" by 26", is engineered for demanding hydraulic system components. Its superior strength and formability ensure reliability in high-pressure environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.882" |
| Length | 28" |
| Width | 26" |
Trusted by engineers across multiple sectors, this carbon steel stock sheet offers exceptional tensile strength and yield strength, critical for fabricating high-pressure hydraulic manifolds, cylinders, and structural supports. Its precise 0.882" thickness, combined with a 28" x 26" dimension, allows for efficient material utilization and minimized waste in CNC machining and forming operations. The inherent toughness of carbon steel ensures resistance to fatigue and impact, vital for longevity in rigorous industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper surface preparation, removing any debris or contaminants. 2. Utilize appropriate fabrication methods (e.g., welding, machining) according to design specifications. 3. Implement quality control checks for dimensional accuracy and structural integrity post-fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding parameters for carbon steel, leading to embrittlement or cracking. | Adhere strictly to welding procedures recommended for the specific carbon steel grade, including preheating and post-weld heat treatment if necessary. |
| Insufficient material thickness for anticipated hydraulic pressures, risking catastrophic failure. | Perform thorough stress analysis and consult hydraulic design standards to confirm the required material thickness based on operating pressures and safety factors. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Cylinder Barrel Construction, High-Pressure Fluid Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||