This robust Nylon stock sheet is engineered for critical pressure and temperature control applications. Its substantial thickness and durable Nylon composition ensure reliable performance in harsh industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.879" |
| Length | 46" |
| Width | 39" |
A high-performance industrial component, this 0.879-inch thick Nylon stock sheet offers exceptional mechanical strength and thermal stability, making it ideal for demanding pressure and temperature control systems. Measuring 46 inches in length and 39 inches in width, it provides ample material for fabrication of seals, gaskets, and structural components subjected to elevated pressures and varying thermal cycles. The inherent chemical resistance and wear properties of Nylon further enhance its suitability for continuous operation in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is cut to the precise dimensions required for the application. 2. Clean all mating surfaces thoroughly to remove any debris or contaminants. 3. Install the fabricated Nylon component, ensuring a snug and secure fit according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized components which leads to premature failure under pressure. | Always verify that the fabricated Nylon component is precisely dimensioned to meet the full operational requirements of the pressure or temperature control system. |
| Inadequate surface preparation leading to leaks or poor sealing. | Thoroughly clean and inspect all contact surfaces before installation to guarantee optimal sealing performance. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic system seals and gaskets, Pneumatic valve components, High-pressure fluid handling manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||