This substantial brass stock sheet offers exceptional durability and corrosion resistance for demanding plumbing and janitorial applications. Its robust dimensions make it suitable for custom fabrication and structural support.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.878" |
| Length | 15" |
| Width | 44" |
A high-performance industrial component, this 0.878-inch thick brass stock sheet is engineered for superior longevity and reliability. Composed of a high-grade brass alloy, it exhibits excellent tensile strength and resistance to a wide range of corrosive fluids commonly found in plumbing and janitorial systems. The precise dimensions of 15 inches in width and 44 inches in length allow for efficient utilization in custom fabrication projects, manifold construction, and backer plates for heavy-duty fixtures. Its non-sparking properties also lend themselves to environments where static discharge is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity before cutting. 2. Utilize appropriate cutting tools designed for brass (e.g., abrasive saws, waterjet). 3. Securely fasten the sheet using compatible fasteners, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material damage or inaccurate cuts. | Employ specialized cutting equipment for brass to ensure clean, precise edges. |
| Inadequate support or fastening, resulting in structural failure under load. | Ensure the sheet is properly supported and fastened with appropriately rated hardware for the intended application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom plumbing manifold construction, Heavy-duty janitorial fixture backer plates, Corrosion-resistant sheeting for specialized equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||