This high-strength carbon steel stock sheet is engineered for extreme pulling and lifting applications. Its substantial thickness and robust material composition ensure unparalleled durability in the most demanding industrial settings.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.872" |
| Length | 40" |
| Width | 21" |
Designed for demanding industrial environments, this carbon steel stock sheet boasts a precise thickness of 0.872 inches, a generous length of 40 inches, and a width of 21 inches. Manufactured from high-grade carbon steel, it offers exceptional tensile strength and yield strength, making it ideal for heavy-duty load-bearing applications. Its inherent toughness resists deformation under significant stress, ensuring reliable performance in lifting rigs, towing equipment, and structural components within harsh operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and pre-drill mounting holes according to design specifications. 3. Securely fasten the stock sheet using appropriate high-tensile grade fasteners, torqued to manufacturer recommendations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for attachment. | Always utilize high-tensile grade fasteners rated for the expected load capacity and torque them to the specified values. |
| Ignoring surface preparation before mounting. | Thoroughly clean and degrease the mounting area to ensure optimal adhesion and load distribution. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty lifting slings and rigging components, Reinforcement plates for towing and pulling mechanisms, Structural support in industrial material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||