This robust carbon steel stock sheet is engineered for critical pressure and temperature control systems. Its substantial thickness and durable material properties ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.869" |
| Length | 18" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.869" thick carbon steel stock sheet measures 18" in length and 43" in width. Composed of high-quality carbon steel, it offers superior tensile strength and high-temperature resistance, making it ideal for fabricating pressure vessels, heat exchangers, and control valve components. The material's inherent durability and weldability facilitate integration into complex industrial assemblies requiring precise dimensional accuracy and robust performance under extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare edges according to welding procedure specifications for optimal joint integrity. 3. Fabricate and install into the designated pressure or temperature control system assembly, ensuring proper sealing and structural support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for high-pressure applications. | Always confirm the 0.869" thickness and its suitability for the intended operating pressure and temperature ratings. |
| Inadequate edge preparation leading to weld defects. | Follow established welding standards and use appropriate beveling techniques for the 0.869" thickness to ensure full penetration welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Construction, High-Temperature Ducting Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||