This premium brass stock sheet is engineered for critical hydraulic system components. Its substantial thickness and brass composition ensure exceptional durability, corrosion resistance, and precise machinability for demanding fluid power applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.867" |
| Length | 27" |
| Width | 27" |
Purpose-built for heavy-duty applications, this brass stock sheet offers a robust solution for hydraulic manifold fabrication, valve bodies, and custom fittings. The 0.867" thickness provides significant structural integrity, while the inherent properties of brass, such as excellent corrosion resistance against a wide range of hydraulic fluids and superior machinability, ensure precise component manufacturing. Its 27" x 27" dimensions offer ample material for complex designs, making it ideal for high-pressure environments and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully clean the mating surfaces of the brass stock sheet and the adjoining components to remove any debris or contaminants. 2. Apply an appropriate sealant or gasket material to the designated areas for a leak-proof seal. 3. Securely fasten the brass stock sheet using high-strength fasteners, ensuring even torque distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can corrode or gall against brass. | Utilize stainless steel or brass-compatible fasteners to prevent galvanic corrosion and ensure long-term joint integrity. |
| Over-tightening fasteners, leading to potential cracking or distortion of the brass sheet. | Adhere to specified torque values for fasteners and use a torque wrench for precise application to avoid damaging the material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Custom Valve Bodies, High-Pressure Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||