This high-strength carbon steel stock sheet, measuring 0.866" thick, 35" in length, and 13" in width, is engineered for critical pulling and lifting operations requiring maximum durability and load-bearing capacity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.866" |
| Length | 35" |
| Width | 13" |
Specified by design engineers worldwide, this carbon steel stock sheet exhibits exceptional tensile strength and fatigue resistance, crucial for applications subjected to repeated high-stress cycles. Its robust 0.866" (22mm) thickness, coupled with a 35" (889mm) length and 13" (330mm) width, provides a substantial surface area for secure mounting and load distribution in heavy-duty rigging and structural support systems. The inherent properties of carbon steel ensure reliable performance in extreme environmental conditions and under significant dynamic loads, making it an indispensable component in industrial material handling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of contaminants. 2. Accurately position the carbon steel stock sheet using appropriate lifting equipment and alignment aids. 3. Secure the sheet using high-strength, load-rated fasteners, ensuring proper torque specifications are met as per the application's engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners that are rated for the full load capacity of the stock sheet and the application. Consult engineering specifications for correct fastener type and grade. |
| Inadequate surface preparation prior to mounting. | Thoroughly clean the mounting surface to remove any grease, dirt, or rust, which can compromise the integrity of the connection. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch and hoist mounting plates, Structural reinforcement for lifting beams and frames, Custom fabricated pulling and rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||