This robust carbon steel stock sheet, engineered to precise dimensions, is the foundational material for high-pressure hydraulic systems. Its exceptional strength and rigidity ensure reliable performance under extreme conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.861" |
| Length | 33" |
| Width | 26" |
Manufactured under strict quality controls, this 0.861-inch thick carbon steel stock sheet boasts a precise 33-inch length and 26-inch width. The high-tensile strength carbon steel composition provides superior structural integrity, resisting deformation and fatigue critical for hydraulic manifold blocks, pump housings, and cylinder components. Its machinability allows for intricate porting and sealing surfaces required in advanced hydraulic designs, ensuring leak-proof operation and extended component lifespan in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare the sheet for machining according to CAD/CAM programming, ensuring proper fixturing to prevent vibration. 3. Perform all necessary machining operations for hydraulic component fabrication, including drilling, milling, and porting, adhering to tight tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before machining. | Thoroughly clean and deburr all edges and surfaces to prevent tool wear and ensure dimensional accuracy. |
| Overheating during cutting operations, leading to material property degradation. | Utilize appropriate coolant and cutting speeds to manage heat and maintain the steel's intended hardness and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pump and Motor Housings, Cylinder Barrels and Rods.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||