This premium Nylon stock sheet, engineered to precise specifications, offers exceptional performance in demanding pressure and temperature control environments. Its robust material properties ensure reliable operation and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.859" |
| Length | 33" |
| Width | 39" |
Specified by design engineers worldwide, this 0.859-inch thick Nylon stock sheet offers a substantial 33-inch by 39-inch surface area, ideal for custom fabrication in pressure and temperature control systems. Exhibiting excellent tensile strength, abrasion resistance, and a broad operating temperature range, this Nylon grade is engineered for resilience and dimensional stability under demanding conditions. It consistently meets stringent performance requirements for sealing, insulation, and structural components in critical industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using mechanical fasteners or a suitable adhesive, ensuring a tight seal as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting technique causing delamination or chipping. | Utilize sharp, high-quality cutting tools specifically designed for plastics, and maintain a consistent cutting speed to prevent material damage. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Apply fasteners evenly and do not exceed the torque specifications recommended for Nylon to avoid material deformation or failure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Sealing components in high-pressure hydraulic systems, Insulating barriers in thermal management equipment, Custom fabricated gaskets and diaphragms for temperature regulation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||