This 0.856" thick carbon steel stock sheet provides exceptional strength and durability for demanding plumbing and janitorial installations. Its substantial gauge ensures long-lasting performance and structural integrity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.856" |
| Length | 23" |
| Width | 42" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.856 inches, a length of 23 inches, and a width of 42 inches. The inherent properties of carbon steel, including its high tensile strength and resistance to impact, make it a superior choice for heavy-duty applications. Its robust composition ensures it can withstand significant operational stress and environmental exposure commonly found in industrial plumbing and janitorial settings. This material is ideal for fabrication of custom components, repair patches, and structural supports.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris before application. 2. Accurately measure and cut the carbon steel stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component using industry-standard welding, bolting, or riveting techniques, ensuring proper load-bearing capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fasteners or inadequate welding techniques, compromising structural integrity. | Consult engineering drawings or relevant industry standards to determine the correct fastener type, size, and spacing, or to ensure proper welding procedures are followed for the specified load requirements. |
| Failing to address surface preparation, leading to poor adhesion or premature corrosion. | Thoroughly clean and degrease the steel surface, removing any rust, paint, or contaminants before any fabrication or installation steps that involve surface treatments or coatings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication of industrial pipe supports and hangers, Heavy-duty floor plates and trench covers in high-traffic janitorial areas, Reinforcement plates for structural elements in plumbing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||