This robust 0.853-inch thick Nylon stock sheet provides superior durability and thermal insulation for critical heating and cooling systems. Its precise dimensions ensure a perfect fit for custom component fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.853" |
| Length | 45" |
| Width | 13" |
A high-performance industrial component, this Nylon stock sheet is engineered for demanding thermal management environments. Measuring 0.853 inches in thickness, 45 inches in length, and 13 inches in width, it offers excellent dimensional stability and a high load-bearing capacity. Nylon's inherent low coefficient of friction and superior abrasion resistance make it ideal for applications involving moving parts or constant contact within heating and cooling infrastructure, such as thermal barriers, wear pads, and custom ducting components. Its thermal insulating properties further contribute to energy efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, router with a suitable bit) to precisely cut the sheet to size. 3. Smooth any rough edges with sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or melting of the Nylon. | Employ sharp, high-speed cutting tools specifically designed for plastics, and maintain consistent feed rates to prevent heat buildup. |
| Over-tightening fasteners, causing stress fractures in the Nylon. | Use appropriate torque settings when securing Nylon components and consider using washers to distribute the load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Thermal Barriers in HVAC systems, Wear Strips and Bushings in Fans and Blowers, Custom Ducting and Airflow Management Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||