This industrial-grade nylon stock sheet is engineered for extreme durability and performance. Its robust composition offers exceptional wear resistance, high impact strength, and excellent machinability, making it ideal for custom fabrication.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.852" |
| Length | 12" |
| Width | 36" |
Purpose-built for heavy-duty applications, this nylon stock sheet boasts a substantial 0.852-inch thickness, measuring 12 inches by 36 inches. The inherent properties of nylon, including its high tensile strength, excellent abrasion resistance, and low coefficient of friction, make it superior for components subjected to significant mechanical stress and friction. This material is highly resistant to chemicals and moisture, ensuring long-term performance in harsh environments. Its machinability allows for precise custom shaping and fitting in critical industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark precise cut lines on the nylon stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saw with carbide blades) for clean, accurate cuts. 3. Finish edges with deburring tools to remove any sharp or rough areas.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades for cutting, leading to melting or chipping. | Employ sharp, high-tooth-count carbide blades designed for cutting plastics to prevent heat buildup and ensure a clean cut. |
| Over-tightening fasteners, potentially cracking or deforming the nylon. | Use appropriate torque settings and consider incorporating washers to distribute load and prevent localized stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom bushings and bearings, Impact plates and shock absorbers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||