High-strength, 0.847-inch thick carbon steel stock sheet, meticulously engineered for critical hydraulic system components. Offers exceptional durability and reliability for demanding fluid power applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.847" |
| Length | 44" |
| Width | 22" |
Precision-manufactured to tight tolerances, this 0.847" thick carbon steel stock sheet (44" L x 22" W) is fabricated from robust, high-yield strength carbon steel. Its precise dimensions ensure seamless integration into hydraulic manifold blocks, cylinder components, and pressure vessel fabrication, minimizing leak paths and maximizing operational efficiency. The material's inherent toughness and resistance to pressure surges make it an ideal choice for environments requiring superior structural integrity and long-term performance in hydraulic fluid management.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and flatness against design specifications. 2. Prepare mating surfaces for optimal sealing and structural integrity. 3. Precisely machine and integrate into hydraulic system components according to engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or out-of-tolerance material for critical hydraulic components. | Always verify that the carbon steel stock sheet meets or exceeds the specified thickness, length, and width tolerances for the intended application. |
| Neglecting proper surface preparation before machining. | Ensure all surfaces are clean, free from contaminants, and properly prepared to achieve optimal sealing and stress distribution within the hydraulic assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Cylinder End Caps and Barrels, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||