This robust 0.842-inch thick carbon steel stock sheet, measuring 47 inches by 28 inches, is engineered for critical hydraulic system components demanding exceptional strength and longevity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.842" |
| Length | 47" |
| Width | 28" |
Trusted by engineers across multiple sectors, this 0.842" thick carbon steel stock sheet (47" x 28") offers superior tensile strength and yield point crucial for high-pressure hydraulic applications. Its dense microstructure ensures excellent machinability and weldability, providing a stable foundation for components subjected to extreme forces and thermal cycling. The material's inherent toughness resists deformation, making it ideal for constructing robust hydraulic cylinders, manifold blocks, and pressure vessels where failure is not an option. Certified to industry standards, this sheet guarantees consistent performance in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the surface of the carbon steel sheet, removing any oil, grease, or debris. 2. Prepare the sheet for machining or fabrication according to design specifications, ensuring precise cuts and tolerances. 3. Implement appropriate welding or joining procedures as per industry best practices for carbon steel, followed by any required post-weld heat treatment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel in high-pressure hydraulic systems. | Always specify and use high-strength carbon steel grades like this 0.842" sheet for hydraulic components to ensure structural integrity and prevent catastrophic failure. |
| Inadequate surface preparation before fabrication. | Ensure all surfaces are meticulously cleaned and free of contaminants to guarantee optimal weld quality and prevent potential weaknesses in the finished component. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Cylinder Barrels, Manifold Blocks, Pressure Vessels, Heavy Equipment Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||