This robust 0.840-inch thick carbon steel stock sheet, measuring 28 inches by 24 inches, is engineered for demanding pulling and lifting applications, providing exceptional structural integrity and load-bearing capacity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.840" |
| Length | 28" |
| Width | 24" |
Manufactured under strict quality controls, this 0.840-inch thick carbon steel stock sheet exhibits superior tensile strength and yield strength, crucial for high-stress environments. Its 28-inch length and 24-inch width offer a substantial surface area for fabrication and integration into complex lifting and pulling systems. The inherent durability of carbon steel ensures resistance to wear, abrasion, and impact, making it suitable for heavy-duty industrial use.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface to ensure it is clean, level, and capable of supporting the intended load. 2. Position the carbon steel stock sheet accurately according to design specifications. 3. Securely fasten the stock sheet using appropriate industrial-grade hardware, ensuring all connections are rated for the anticipated pulling or lifting forces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly rated fasteners. | Always select fasteners that are explicitly rated for the maximum anticipated load and are compatible with carbon steel, such as grade 8 or higher bolts and nuts. |
| Failure to account for dynamic loading conditions. | Design and installation must consider shock loads and cyclic stresses, not just static weight, to prevent premature component failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch and hoist anchor points, Reinforcement plates for industrial machinery, Custom fabrication for towing and recovery equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||