This premium Nylon stock sheet offers exceptional durability and performance. Engineered for demanding environments, it provides superior wear resistance, high impact strength, and excellent chemical inertness.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.839" |
| Length | 34" |
| Width | 45" |
Built to exacting engineering tolerances, this 0.839-inch thick Nylon stock sheet measures 34 inches by 45 inches. Fabricated from high-performance Nylon 6/6, it exhibits a high tensile strength of 12,000 psi and a flexural modulus of 450,000 psi, ensuring robust structural integrity. Its low coefficient of friction (0.1-0.3) and excellent abrasion resistance make it suitable for sliding components, wear pads, and protective barriers in harsh industrial settings. The material's inherent chemical resistance to oils, greases, and many solvents further enhances its suitability for demanding operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the Nylon stock sheet according to the required dimensions using a calibrated measuring tool and a non-permanent marker. 2. Utilize a high-speed cutting tool, such as a precision saw with a fine-tooth blade designed for plastics, to achieve clean, precise cuts. Ensure proper dust extraction and cooling. 3. Smooth all cut edges using a deburring tool or fine-grit sandpaper to remove sharp edges and prevent material stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard saw blade not designed for plastics, leading to melting or chipping. | Employ a saw blade with a high tooth count and a negative or neutral rake angle specifically formulated for cutting Nylon. Maintain a consistent, moderate feed rate. |
| Applying excessive heat during cutting, causing material deformation or degradation. | Use a cooling lubricant or an air blast to manage heat buildup. Periodically lift the blade to allow heat dissipation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Protective sheeting, Custom fabricated components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||