This heavy-duty Nylon stock sheet is engineered for extreme industrial environments. Its robust material properties and substantial dimensions make it ideal for demanding pressure and temperature control applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.838" |
| Length | 13" |
| Width | 46" |
Purpose-built for heavy-duty applications, this 0.838-inch thick Nylon stock sheet (13" x 46") provides exceptional mechanical strength and wear resistance. Composed of high-performance Nylon, it exhibits excellent thermal stability, allowing operation across a significant temperature range while maintaining structural integrity under pressure. Its dense, low-friction surface minimizes wear in sliding and bearing applications, making it a superior choice for components in machinery, fluid handling systems, and demanding environmental controls where consistent performance is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to precise dimensions using appropriate industrial cutting tools. 2. Ensure surfaces are clean and free of contaminants before assembly. 3. Securely fasten the fabricated component using recommended industrial hardware and fasteners, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick polymers. | Utilize carbide-tipped blades or specialized polymer cutting equipment to prevent melting or chipping during fabrication. |
| Over-tightening fasteners, leading to material stress or cracking. | Employ torque wrenches and use appropriate washers to distribute load evenly, preventing localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure manifold components, Temperature-resistant seals and gaskets, Wear pads and bushings in extreme environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||