This heavy-duty carbon steel stock sheet provides a robust and durable foundation for critical pulling and lifting equipment. Its substantial dimensions and material strength ensure exceptional load-bearing capacity and long-term operational integrity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.838" |
| Length | 29" |
| Width | 43" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.838-inch thickness, offering superior structural integrity for demanding pulling and lifting tasks. Measuring 29 inches in length and 43 inches in width, it provides ample surface area for fabrication and integration into heavy-duty machinery. Composed of high-grade carbon steel, it exhibits excellent tensile strength and wear resistance, making it ideal for high-stress environments where consistent performance and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and capable of supporting the intended load. 2. Position the carbon steel stock sheet securely, aligning with pre-drilled holes or designated attachment points. 3. Fasten the sheet using appropriate, heavy-duty hardware (e.g., high-strength bolts, welding) as per the specific application's design and load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners. | Always utilize fasteners rated for the anticipated loads and environmental conditions, ideally matching or exceeding the tensile strength of the carbon steel sheet. |
| Inadequate surface preparation leading to uneven stress distribution. | Ensure the mounting surface is perfectly flat and free of debris or imperfections that could create localized stress points on the sheet. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch mounting plates, Crane outrigger pads, Industrial towing eye fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||