This robust brass stock sheet, measuring 0.837" thick, 19" wide, and 39" long, is specifically engineered for heavy-duty pulling and lifting applications where superior material integrity is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.837" |
| Length | 19" |
| Width | 39" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.837" thickness, providing exceptional structural integrity for demanding loads. Its inherent properties of high tensile strength, excellent corrosion resistance, and non-sparking characteristics make it an ideal material for use in environments where safety and longevity are critical. The dimensions of 19" x 39" offer ample surface area for fabrication and integration into various pulling and lifting systems, ensuring consistent performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application environment. 2. Fabricate the brass stock sheet to precise design specifications using appropriate cutting and shaping tools. 3. Securely integrate the fabricated brass component into the pulling or lifting assembly, adhering to all load-bearing and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys in highly corrosive environments. | Specify naval brass or other high-copper alloys with enhanced corrosion resistance for aggressive chemical or marine conditions. |
| Insufficient material thickness for the anticipated load. | Perform thorough load calculations and select a brass stock sheet with a thickness that exceeds the maximum expected stress by a suitable safety factor. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Marine lifting equipment bases, Specialized rigging hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||