This 0.836-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Measuring 31 inches by 30 inches, it's an engineered solution for robust, transparent barriers and protective enclosures.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.836" |
| Length | 31" |
| Width | 30" |
Manufactured under strict quality controls, this 0.836-inch thick polycarbonate sheet exhibits superior impact strength, exceeding that of glass by over 250 times. Its optical clarity ensures excellent visibility, while its inherent UV resistance prevents yellowing and degradation from sunlight exposure. The material's wide operating temperature range (-40°F to 270°F) makes it suitable for diverse environmental conditions. Precisely cut to 31 inches by 30 inches, this stock sheet is engineered for demanding applications requiring robust protection and visual transparency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning with mounting points. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress and potential cracking. | Use washers and avoid direct fastener contact. Tighten fasteners until snug, not until deformation occurs. |
| Using abrasive cleaners that can scratch the surface. | Clean with mild soap and water, using a soft cloth or sponge. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and protective shielding, Glazing for industrial equipment, Point-of-purchase displays and signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||