This premium nylon stock sheet offers exceptional durability and resistance for critical pressure and temperature control applications. Its robust material properties ensure reliable performance under strenuous conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.834" |
| Length | 43" |
| Width | 35" |
Precision-manufactured to tight tolerances, this 0.834-inch thick nylon stock sheet measures 43 inches in length and 35 inches in width. Engineered from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it suitable for demanding environments. Its inherent dielectric properties and chemical resistance further enhance its utility in pressure and temperature regulation systems, seals, gaskets, and structural components within industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Accurately measure and cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut nylon component using specified fasteners, ensuring even pressure distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to rough edges and potential material stress. | Employ sharp, industrial-grade cutting tools specifically designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, causing localized stress and potential cracking of the nylon. | Torque fasteners to the manufacturer's recommended specifications, using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel linings, High-temperature seals and gaskets, Insulating components in temperature control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||