This robust brass stock sheet is engineered for demanding pressure and temperature control systems. Its precise dimensions and inherent material properties ensure reliable performance and longevity in critical industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.830" |
| Length | 30" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 0.830" thick brass stock sheet offers exceptional dimensional stability. Composed of a high-quality brass alloy, it exhibits excellent machinability, good corrosion resistance, and superior thermal conductivity, making it ideal for heat exchangers, valve components, and pressure vessel fabrication where consistent performance under varying thermal and pressure loads is paramount. The 30" x 19" dimensions provide ample material for complex component manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application environment. 2. Ensure proper edge preparation and deburring before joining or machining. 3. Follow established safety protocols for cutting, shaping, and welding brass.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect tooling that can lead to excessive heat generation and deformation of the brass. | Employ sharp, specialized tooling designed for brass machining and maintain appropriate cutting speeds and feed rates to minimize heat buildup. |
| Inadequate surface cleaning prior to welding or brazing, leading to compromised joint integrity. | Thoroughly degrease and mechanically clean the brass surfaces using appropriate solvents and abrasives to ensure a clean, oxide-free interface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Valve and fitting manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||