This heavy-duty carbon steel stock sheet is engineered for high-pressure hydraulic systems. Its robust 0.825-inch thickness and precise dimensions ensure superior structural integrity and performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.825" |
| Length | 42" |
| Width | 47" |
Built to exacting engineering tolerances, this carbon steel stock sheet offers exceptional durability for critical hydraulic applications. With a substantial 0.825" thickness, it provides the necessary rigidity and load-bearing capacity for robust manifold blocks, hydraulic cylinder components, and heavy-duty structural supports within hydraulic machinery. The material's inherent strength and resistance to fatigue make it ideal for environments subjected to extreme pressures and continuous operation, ensuring long-term reliability and preventing premature failure. Its precise 42" x 47" dimensions minimize material waste and facilitate efficient fabrication processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and flatness against design specifications. 2. Prepare surfaces for machining or welding according to industry best practices. 3. Fabricate components using appropriate tooling and techniques to achieve desired hydraulic system functionality.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade steel for high-pressure hydraulic components. | Always specify and use carbon steel meeting stringent standards for hydraulic applications to ensure adequate strength and fatigue resistance. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean and degrease the carbon steel surface to prevent contamination and ensure strong, reliable welds and precise machining. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Cylinder Components, Heavy-Duty Hydraulic Machinery Support Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||