This robust 0.824" thick polycarbonate stock sheet is engineered for high-stress pulling and lifting operations. Its superior impact strength and clarity make it an ideal component for demanding environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.824" |
| Length | 41" |
| Width | 16" |
Built to exacting engineering tolerances, this 0.824-inch thick polycarbonate sheet offers exceptional tensile strength and impact resistance, crucial for load-bearing pulling and lifting mechanisms. Its inherent clarity allows for visual inspection of components within the assembly. The material's wide operating temperature range and resistance to chemical degradation ensure reliable performance in diverse industrial settings. Dimensions are 41 inches in length and 16 inches in width, providing ample surface area for fabrication into custom components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove debris and contaminants. 2. Position the polycarbonate sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking in the polycarbonate. | Use torque-limiting tools and install fasteners with adequate spacing, considering the material's expansion and contraction. |
| Using incompatible adhesives or solvents that can degrade the polycarbonate's structural integrity. | Consult the manufacturer's compatibility chart and use only recommended adhesives and cleaning agents for polycarbonate. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding for lifting equipment, Fabrication of custom pulling guides, Impact-resistant components in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||