This robust 0.824-inch thick 304 stainless steel stock sheet is engineered for superior performance in demanding heating, cooling, and industrial environments. Its inherent corrosion resistance ensures longevity and reliability.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.824" |
| Length | 36" |
| Width | 32" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.824 inches in thickness, 36 inches in length, and 32 inches in width. Composed of 18% chromium and 8% nickel, it offers exceptional resistance to oxidation and general corrosion, making it ideal for high-temperature applications, heat exchangers, and ductwork in HVAC systems. Its robust mechanical properties provide structural integrity under significant thermal stress and moderate pressure loads, ensuring reliable performance in industrial processing equipment and corrosive chemical environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the sheet metal according to the design specifications, aligning edges as required. 3. Secure the sheet using appropriate fastening methods, such as welding, riveting, or bolting, ensuring a watertight and airtight seal if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-stress applications. | Always verify the material thickness and its load-bearing capacity against the application's requirements to prevent premature failure. |
| Inadequate edge preparation before joining. | Thoroughly clean and prepare all edges to be joined to ensure optimal weld penetration or fastener strength and prevent corrosion initiation points. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Heat Exchanger Construction, High-Temperature HVAC Ducting, Corrosion-Resistant Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||