High-performance Nylon stock sheet engineered for demanding hydraulic systems. This robust material offers exceptional strength, low friction, and superior wear resistance, ensuring longevity and reliability in critical components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.821" |
| Length | 45" |
| Width | 19" |
Specified by design engineers worldwide, this 0.821" thick Nylon stock sheet, measuring 45" in length and 19" in width, is manufactured to meet stringent hydraulic application requirements. Its intrinsic properties include excellent tensile strength, good abrasion resistance, and a low coefficient of friction, making it ideal for seals, wear pads, and other critical dynamic components within hydraulic circuits. The material's inherent toughness and resistance to moisture absorption contribute to its stability and performance under varying operational pressures and environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is cut to the precise dimensions required for the component. 2. Machine the component using appropriate tooling for Nylon, maintaining tight tolerances. 3. Inspect the finished part for any defects or deviations from the design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard machining tools not optimized for Nylon, leading to melting or poor surface finish. | Employ cutting tools with appropriate rake angles and speeds for plastics to prevent heat buildup and ensure clean cuts. |
| Ignoring potential moisture absorption in humid environments, which can affect dimensional stability. | Consider pre-conditioning the Nylon stock or design components with slight allowances for potential swelling. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Rings and Bushings, Piston Rod Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||